vishay general semiconductor bym13-20 thru bym13-60, sgl41-20 thru sgl41-60 document number 88548 03-nov-06 www.vishay.com 1 surface mount schottky barrier rectifier features ? melf schottky rectifier ? ideal for automated placement ? guardring for overvoltage protection ? low power losses, high efficiency ? low forward voltage drop ? high surge capability ? meets msl level 1, per j-std-020c, lf max peak of 250 c ? solder dip 260 c, 40 seconds ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in low voltage high frequency inverters, free- wheeling, dc-to-dc converters, and polarity protection applications mechanical data case: do-213ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002b and jesd22-b102d e3 suffix for commercial grade, he3 suffix for high reliability grade (aec q101 qualified) polarity: two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type do-213ab major ratings and characteristics i f(av) 1.0 a v rrm 20 v to 60 v i fsm 30 a v f 0.50 v, 0.70 v t j max. 125 c, 150 c maximum ratings (t a = 25 c unless otherwise noted) parameter symbol bym13-20 bym13-30 bym13-40 bym13-50 bym13-60 unit denotes schottky devices: 1st band is orange sgl41-20 sgl41-30 sgl41-40 sgl41-50 sgl41-60 polarity color bands (2nd band) voltage type gray red orange yellow green maximum repetitive peak reverse voltage v rrm 20 30 40 50 60 v maximum rms voltage v rms 14 21 28 35 42 v maximum dc blocking voltage v dc 20 30 40 50 60 v maximum average forward rectified current (see fig. i f(av) 1.0 a peak forward surge current 8.3 ms single half sine- wave superimposed on rated load i fsm 30 a voltage rate of change (rated v r ) dv/dt 10000 v/s operating junction temperature range t j - 55 to + 125 - 55 to + 150 c storage temperature range t stg - 55 to + 150 c
www.vishay.com 2 document number 88548 03-nov-06 vishay general semiconductor bym13-20 thru bym13-60, sgl41-20 thru sgl41-60 note: (1) pulse test: 300 s pulse width, 1 % duty cycle note: (1) thermal resistance junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol bym13-20 bym13-30 by m13-40 bym13-50 bym13-60 unit sgl41-20 sgl41-30 sgl 41-40 sgl41-50 sgl41-60 maximum instantaneous forward voltage (1) at 1.0 a v f 0.50 0.70 v maximum reverse current at rated dc blocking voltage (1) t a = 25 c t a = 100 c i r 0.5 ma 10 5.0 typical junction capacitance at 4.0 v, 1.0 mhz c j 110 80 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol bym13-20 bym13-30 bym13- 40 bym13-50 bym13-60 unit sgl41-20 sgl41-30 sgl41- 40 sgl41-50 sgl41-60 maximum thermal resistance (1) r ja r jt 75 30 c/w ordering information preferred p/n unit weight (g) preferred package code base quantity delivery mode sgl41-40-e3/96 0.114 96 1500 7" diameter plastic tape & reel gl41-40-e3/97 0.114 97 5000 13" diameter plastic tape & reel bym13-40-e3/96 0.114 96 1500 7" diameter plastic tape & reel bym13-40-e3/97 0.114 97 5000 13" diameter plastic tape & reel figure 1. forward current derating curve 0 25 50 75 100 125 150 175 p.c.b. mo u nted on 0.24 x 0.24" (6.0 x 6.0 mm) copper land areas resisti v e or ind u cti v e load sgl41-20 - sgl41-40 sgl41-50 & sgl41-60 1.0 0.75 0.50 0.25 0 a v erage for w ard c u rrent ( a) terminal temperat u re (c) figure 2. maximum non-repetitive peak forward surge current 1 5 10 15 20 25 30 10 100 at rated t d 8 .3 ms single half sine- w a v e nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a)
document number 88548 03-nov-06 www.vishay.com 3 bym13-20 thru bym13-60, sgl41-20 thru sgl41-60 vishay general semiconductor package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reve rse characteristics 0 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 1 10 0.1 0.01 50 sgl41-20 - sgl41-40 sgl41-50 & sgl41-60 p u lse w idth = 300 s 1 % d u ty cycle t j = 150 c t j = 125 c t j = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 0 20 40 60 8 0 100 1 10 100 0.1 0.01 0.001 sgl41-20 - sgl41-40 sgl41-50 & sgl41-60 t j = 125 c t j = 25 c t j = 75 c percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent (ma) figure 5. typical junction capacitance 1 10 100 40 0.1 sgl41-20 - sgl41-40 sgl41-50 & sgl41-60 400 100 10 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p re v erse v oltage ( v ) j u nction capaci tance (pf) solderable e n ds 1st ba n d 0.022 (0.56) 0.01 8 (0.46) 0.205 (5.2) 0.1 8 5(4.7) d1= 0.105 0.095 (2.67) (2.41) d2=d1 +0 -0.00 8 (0.20) 1st b and denotes type and positi v e end (cathode) d2 0.022 (0.56) 0.01 8 (0.46) do-213ab
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
